Home - Blog - Details

Chemical changes of quartz after heating

Quartz undergoes a series of chemical changes during the heating process, mainly including mineral phase transitions, oxidation reactions, dehydration, and weight loss phenomena. The following is the specific chemical change process:

1. Mineral phase transition
Quartz sand undergoes mineral phase transition at high temperatures, transferring from alpha quartz phase to beta quartz phase. The alpha quartz phase will transform into the beta quartz phase above 573 ℃, and the beta quartz phase has higher stability. Therefore, at high temperatures, quartz sand will exhibit the form of the beta quartz phase.

2. Oxidation reaction
2.1 Reaction between Quartz Sand and Oxygen
Under high temperature conditions, quartz sand reacts with oxygen in the air to produce silicon dioxide. This reaction is an exothermic reaction that can produce high temperatures and bright flames.

2.2 Reaction between Quartz Sand and Metal Oxide
Quartz sand can also react with metal oxides at high temperatures to form metallic minerals. For example, under the condition of adding Al2O3, quartz sand can react with Al2O3 to form capillary stones, which are minerals at high temperatures.

3. Dehydration and weight loss phenomena
At high temperatures, quartz sand undergoes dehydration reactions. After a certain amount of heating, the moisture in quartz sand will gradually evaporate with the increase of heat, and this phenomenon is called weight loss. Therefore, during the high temperature process, the weight of quartz sand will gradually decrease.

4. Chemical composition analysis during quartz tube heating
In the process of heating quartz tubes, silicon dioxide is the main component, and the determination of its content is of great significance for the quality and performance evaluation of quartz tubes. Common measurement methods include gravimetric method, titration method, and spectrophotometric method.

4.1 Weight method
The weight method is a classic chemical analysis method that determines the content of silicon dioxide in a sample by measuring its mass. In the analysis of heated quartz tubes, commonly used weight methods include hydrochloric acid evaporation dehydration method and ammonium chloride method.

4.2 Spectrometric method
Spectrophotometry is an analytical method based on the principle of selective absorption of light by substances. In the analysis of heated quartz tubes, ultraviolet visible absorption spectroscopy (UV Vis) can be used to determine the content of silicon dioxide.

4.3 Analysis of Impurity Element Content
In addition to silicon dioxide, heating quartz tubes may also contain other impurity elements such as aluminum, iron, calcium, magnesium, etc. The content of these impurity elements has a significant impact on the performance and application of quartz tubes. Common methods include atomic absorption spectroscopy (AAS), inductively coupled plasma mass spectrometry (ICP-MS), and X-ray fluorescence spectroscopy (XRF).

In summary, quartz undergoes chemical changes such as mineral phase transition, oxidation reaction, dehydration, and weight loss during the heating process, which have a significant impact on its physical and chemical properties. By analyzing the content of silicon dioxide and impurity elements in heated quartz tubes, the chemical composition and performance characteristics of quartz tubes can be comprehensively understood, providing strong support for quality control, performance optimization, and application field expansion of quartz tubes.

Send Inquiry

You Might Also Like