Quartz Wafer Cleaning Boat

Quartz Wafer Cleaning Boat

A quartz wafer cleaning boat is a device used for wafer cleaning in the semiconductor manufacturing process.
Material: 99.99% quartz

Description

Features

 

  • High temperature resistance
  • Corrosion resistance
  • Wear resistance
  • Easy to clean

Use: remove surface contaminants

Ensure the manufacturing quality of semiconductor chips.

 

Application

1. Pre-Diffusion Cleaning

Used to transport wafers through wet bench or immersion cleaning steps (e.g., RCA cleaning) to remove organic, metallic, and particulate contaminants before high-temperature diffusion or oxidation processes.

2. Post-CMP (Chemical Mechanical Planarization) Cleaning

Holds wafers during post-polishing cleans to eliminate slurry residues and surface defects, ensuring optimal flatness for subsequent lithography steps.

3. Front-End-of-Line (FEOL) Fabrication

Employed in critical FEOL cleaning stages where ultra-clean surfaces are required for gate oxide growth, epitaxial deposition, or ion implantation.

4. Back-End-of-Line (BEOL) Processing

Supports wafers during post-etch or post-deposition cleaning to remove photoresist, etch byproducts, and metallic impurities after interconnect formation.

5. Advanced Packaging

Facilitates wafer-level cleaning before dicing or bonding in 2.5D/3D IC packaging, ensuring contamination-free interfaces for reliable interconnects.

6. Photovoltaic Manufacturing

Used in solar cell production to clean silicon substrates, enhancing surface quality for improved light absorption and energy conversion efficiency.

 

Properties

 

Physical Properties

Values

Purity

>99.99%

Density

2.2g/cm3

Transparency

>90%

Mohs Hardness

5.5--6.5

Deformation Point

1280℃

Softening Point

1750℃

Annealing Point

1250℃

Specific Heat (20 - 350°C)

670J/kg.℃

Thermal Conductivity (20°C)

1.4W/m.℃

Heat Conductivity (w/m.k,1000 ℃ )

1.0-1.2

Refractive Index

1.4585

Coefficient of Thermal Expansion

5.510 -7cm/cm.℃

Hot - working Temperature

1750--2050℃

Short - term Service Temperature

1450℃

Long - term Service Temperature

1100℃

 

Chemical Properties

Values

Acid resistant

Strong Acid(except HF),Strong alkali, organic solution

High temperatures Corrosion resistant

Excellent

Metal Impurity Content

<5 ppm

 

Electrical Properties

Values

Resistivity

7107Ω.cm

Insulation Strength

250~400Kv/cm

Dielectric Constant

3.7~3.9

Dielectric Absorption Coefficient

<410-4

Dielectric Loss Coefficient

<110-4

 

Mechanical Properties

Values

Compressive Strength

1100MPa

Bending Strength

67MPa

Tensile Strength

48MPa

Poisson's Ratio

0.14~0.17

Young's Modulus

72000MPa

Shear Modulus

31000MPa

 

Cleaning methods

 

Immersion cleaning:

Place the wafer in the cleaning boat, then immerse the cleaning boat in the cleaning liquid, and increase the contact between the cleaning liquid and the wafer surface by lifting the wafer boat to improve the cleaning effect.

 

Spray cleaning:

Stand the cleaning boat upright in the spray chamber, and use the nozzle to spray the cleaning liquid on the wafer surface to remove contaminants. 

 

Importance of cleaning boats:

  • Ensure wafer cleanliness: A clean wafer surface is crucial to the manufacturing quality of semiconductor chips, and the cleaning boat plays a vital role in the cleaning process.
  • Ensure the reliability of semiconductor chips: Ensure the reliability of chips and reduce product defects by removing surface contaminants.
  • Improve the yield of semiconductor chips: Improve the cleanliness of wafers, thereby improving the yield of semiconductor chips.

Hot Tags: quartz wafer cleaning boat, China quartz wafer cleaning boat manufacturers, suppliers, factory

You Might Also Like

Shopping Bags