Precautions For Daily Cleaning Of UV Glass
Leave a message
Selection of cleaning tools
Cleaning agent: You can choose commercially available glass cleaning agents or homemade mixtures (water+white vinegar/alcohol), but avoid using cleaning agents containing abrasive particles to avoid scratching the glass.
Cleaning cloth: Use soft, absorbent, and lint free fabric to prevent scratching the glass surface and leaving fluff.
Auxiliary tools: Newspapers or old clothes can be used to wipe glass, which can leave no traces on the glass.
Cleaning steps
Preparation: First, use a sponge or damp cloth to wipe away dust and stains on the glass.
Apply cleaning agent: Spray the cleaning agent evenly on the glass surface, or apply the cleaning agent to a glass cleaning cloth.
Wipe: Wipe the glass in the order of top to bottom and left to right, with moderate force to avoid scratching.
Secondary wiping: Use clean newspaper or old clothes to repeatedly wipe along the glass surface until the glass is clean and transparent.
Inspection: After cleaning, carefully check for any missing stains, and if so, wipe again.
Other key points to note
Wiping direction: Wipe in a certain direction to avoid residual cleaning agents.
Avoid direct use of water: Directly wiping with water may cause water droplets to condense and leave watermarks, and should be used in conjunction with cleaning agents.
Regular cleaning: Regularly clean the glass to maintain its cleanliness.
UVLED curing equipment lamp head glass cleaning
Pollution sources and prevention
The main sources of pollution for the lamp head glass of UVLED curing equipment include daily floating dust pollution, adhesive small molecules and small ink molecules falling onto the glass during UV glue curing of organic volatiles, and certain UV adhesive product materials evaporating and falling onto the glass at high temperatures. Therefore, it is necessary to maintain a clean environment and use equipment in a dust-free environment as much as possible.
Cleaning methods
Regularly clean the lamp head glass and gently wipe it with a dust-free cloth dipped in alcohol or acetone. When the glass is severely contaminated or damaged, it is necessary to promptly contact the UVLED curing equipment supplier for replacement.
UV filter cleaning
As an important part of the camera, UV lenses should be cleaned with extra care to prevent scratches. You can first purchase specialized UV lens cleaning solution, spray it onto the lens, then gently wipe it with a soft damp cloth, and finally clean it twice with water

